top of page

Groupe de soutien

Public·9 membres

DriveDx: The ultimate tool for SSD and HDD health monitoring and diagnostics. Download for free and prevent data loss and downtime.


DriveDx Free Download: How to Monitor and Diagnose Your Drive Health




If you want to protect your data from loss and downtime caused by unexpected drive failures, you need a reliable and comprehensive tool that can monitor and diagnose your drive health. One such tool is DriveDx, an advanced drive-health diagnostic and monitoring utility for Mac.


DriveDx is not like most drive utilities that only check the built-in S.M.A.R.T. status of the drive, which provides little information about the actual state of the physical drive. Instead, DriveDx analyzes the current state of the drive using all the drive health indicators that are most likely to point to a potential drive issue, such as SSD wear out, I/O errors, bad sectors, etc.




drivedx free download


Download Zip: https://www.google.com/url?q=https%3A%2F%2Fblltly.com%2F2urypw&sa=D&sntz=1&usg=AOvVaw0iUzGnUW0nmdoJjyTw2kHN



In this article, we will show you how to download, install, and use DriveDx to keep an eye on your drive health and prevent data loss. We will also compare DriveDx with some alternatives that you can use on other platforms.


Features of DriveDx




DriveDx has many features that make it stand out from other drive utilities. Here are some of them:


Advanced drive health diagnostics




DriveDx uses a sophisticated algorithm that takes into account various factors that affect the drive health, such as temperature, power cycles, workload, etc. It also supports modern SSDs and HDDs from different manufacturers and models. It can provide you with a detailed report of your drive health, performance, errors, and more.


Drive failing (pre-fail) state detection




Unlike most other tools, DriveDx detects not only "OK/Verified" and "Failed" drive health states, but also the "Failing (Pre-fail)" drive state. This means that you can detect problems much earlier than when using other SMART monitoring utilities. This gives you more chances to save your critical data before any data loss occurs.


Real-time drive health monitoring




DriveDx runs in the background and periodically performs checks to determine the health of your SSD or HDD. When any issue or problem is found, it alerts you immediately. DriveDx acts as an "early warning system" for pending drive problems. You can also view the current status of your drives in the menu bar or in the app window.


Early warning system




DriveDx features a special multi-tier warning system that will inform you about deviations from the normal state of drive attributes. It constantly monitors each S.M.A.R.T. attribute and its change dynamics and starts continuously warning you as the drive degrades. On the initial stages of drive degradation, you will receive notifications of the Warning type, then Failing (means that this drive parameter is in a pre-failure state) and only then Failed.


drivedx free download mac


drivedx free download full version


drivedx free download crack


drivedx free download for windows


drivedx free download alternative


drivedx free download license key


drivedx free download reddit


drivedx free download review


drivedx free download serial number


drivedx free download dmg


how to get drivedx for free


how to use drivedx for free


how to install drivedx for free


how to activate drivedx for free


how to update drivedx for free


is drivedx safe to download


is drivedx worth downloading


is drivedx compatible with macos monterey


is drivedx better than disk utility


is drivedx available for windows


best free drive health diagnostic tool


best free drive monitoring software


best free drive failure prediction app


best free drive performance rating program


best free drive self-test utility


download drivedx from official website


download drivedx from macupdate


download drivedx from hollands software


download drivedx latest version


download drivedx trial version


where to download drivedx for free


where to find drivedx license key for free


where to read drivedx reviews and ratings


where to learn how to use drivedx effectively


where to get help and support for drivedx


why download drivedx for mac


why use drivedx for ssd and hdd health check


why trust drivedx for drive failure prevention


why choose drivedx over other drive utilities


why upgrade to drivedx pro version


Drive self-tests




DriveDx allows you to start and control diagnostic self-tests of SSD or HDD. The primary goal is to quickly identify if the drive is faulty. You can choose between short and full (extended) self-tests depending on how thorough you want to be and how much time you have. The results of the self-tests are displayed in the app window and can help you identify any potential problems with your drive.


How to download and install DriveDx




If you want to try DriveDx for yourself, you can download it from the official website. Here are the system requirements and pricing details:



System Requirements


Pricing


  • macOS 10.6.8 or later



  • 64-bit processor



  • At least one internal or external SSD or HDD



  • Free trial for 10 days



  • $19.99 for a personal license (up to 5 Macs)



  • $39.99 for a family license (up to 10 Macs)



  • $99.99 for a business license (up to 50 Macs)



To download and install DriveDx, follow these steps:



  • Go to https://binaryfruit.com/drivedx and click on the Download button.



  • Open the downloaded file and drag the DriveDx app to the Applications folder.



  • Launch the DriveDx app from the Applications folder or the Launchpad.



  • Agree to the terms and conditions and enter your email address to start the free trial.



  • If you want to buy a license, click on the Buy Now button and follow the instructions.



How to use DriveDx




Once you have installed and launched DriveDx, you can start using it to monitor and diagnose your drive health. Here are some tips on how to use DriveDx effectively:


Launching and registering the app




When you launch DriveDx for the first time, you will see a window that asks you to enter your email address and agree to the terms and conditions. You can also choose whether to send anonymous usage statistics to help improve the app. After that, you will see the main window of DriveDx, where you can view your drives and their health status.


If you have purchased a license, you can register the app by clicking on the Register button in the menu bar and entering your license key. You can also check for updates, preferences, and help from the menu bar.


Viewing and interpreting drive health indicators




In the main window of DriveDx, you will see a list of your drives on the left side and their health indicators on the right side. You can select any drive from the list to see more details about it. The health indicators include:



  • Overall Health Rating: This is a percentage that shows how healthy your drive is based on all the available indicators. The higher the percentage, the better. If it drops below 90%, you should pay attention to your drive and back up your data.



  • Health Status: This is a color-coded label that shows whether your drive is OK, Warning, Failing, or Failed. If it is anything other than OK, you should take action immediately.



  • Lifetime Left Indicator: This is a percentage that shows how much of your drive's expected lifetime is left based on its usage and wear level. The lower the percentage, the closer your drive is to its end of life.



  • S.M.A.R.T. Status: This is a label that shows whether your drive's built-in S.M.A.R.T. system reports any errors or failures. If it is anything other than Verified, you should check your drive for problems.



  • S.M.A.R.T. Attributes: These are various parameters that measure different aspects of your drive's performance, reliability, and health. You can see their current values, thresholds, worst values, and status. You can also sort them by name, value, status, or importance.



You can also view more information about your drive by clicking on the tabs at the top of the window. These include:



  • Drive Info: This shows general information about your drive, such as model, serial number, firmware version, capacity, interface, power cycles, etc.



  • Error Statistics: This shows error statistics for your drive, such as read errors, write errors, reallocated sectors, CRC errors, etc.



  • Self-test Logs: This shows the results of the self-tests that you have run on your drive, such as the type, status, duration, and errors of each test.



  • Drive Identity: This shows the technical information about your drive, such as the supported features, modes, commands, and standards.



Setting up notifications and reports




One of the most useful features of DriveDx is that it can notify you of any changes or issues with your drive health via email, pop-up, or sound alerts. You can also configure DriveDx to send you periodic reports of your drive health via email. To set up notifications and reports, follow these steps:



  • Click on the Preferences button in the menu bar and select the Notifications tab.



  • Check the boxes for the types of notifications and reports that you want to receive.



  • Enter your email address and SMTP server settings if you want to receive email notifications and reports.



  • Click on the Test button to test your email settings and make sure they work.



  • Click on the Save button to apply your changes.



Running and controlling drive self-tests




As mentioned earlier, DriveDx allows you to run diagnostic self-tests on your drive to check for any problems or errors. There are two types of self-tests that you can run: short and full (extended). The short test takes a few minutes and checks the most critical parts of the drive. The full test takes longer and checks the entire surface of the drive. To run and control drive self-tests, follow these steps:



  • Select the drive that you want to test from the list on the left side of the window.



  • Click on the Start Self-test button at the bottom of the window and choose the type of test that you want to run.



  • Wait for the test to complete. You can see the progress and status of the test in the Self-test Logs tab.



  • If you want to stop or abort the test, click on the Stop Self-test button at the bottom of the window.



  • If there are any errors or failures detected by the test, you will see them in the Error Statistics tab.



Alternatives to DriveDx




DriveDx is a great tool for monitoring and diagnosing your drive health on Mac, but what if you want to use a similar tool on other platforms? Here are some alternatives that you can try:


CrystalDiskInfo for Windows




CrystalDiskInfo is a free and open-source tool that displays S.M.A.R.T. information and disk temperature for your drives on Windows. It also supports various types of drives, such as HDDs, SSDs, USB drives, RAID arrays, etc. It can alert you of any problems with your drive health via email or sound notifications. You can also customize its appearance and behavior with various themes and settings.


Stats for Mac




Stats is a free and open-source tool that displays various system information and statistics for your Mac in the menu bar. It includes a disk module that shows your drive usage, temperature, S.M.A.R.T. status, and more. You can also view more details about your drive by clicking on its icon in the menu bar. You can also customize its appearance and behavior with various themes and settings.


GSmartControl for Mac, Windows, Linux, and BSD




GSmartControl is a free and open-source tool that displays S.M.A.R.T. information and runs self-tests on your drives on various platforms. It supports both internal and external drives, as well as RAID arrays. It can alert you of any problems with your drive health via pop-up or sound notifications. You can also view more details about your drive by double-clicking on its icon in the main window.


Conclusion




In conclusion, DriveDx is a powerful and user-friendly tool that can help you monitor and diagnose your drive health on Mac. It can detect potential problems with your drive much earlier than other tools by using advanced algorithms and indicators. It can also notify you of any changes or issues with your drive health via email, pop-up, or sound alerts. You can also run diagnostic self-tests on your drive to check for any errors or failures.


If you want to try DriveDx for yourself, you can download it from https://binaryfruit.com/drivedx and start a free trial for 10 days. If you like it, you can buy a license for a reasonable price depending on how many Macs you want to use it. We highly recommend DriveDx as a must-have tool for any Mac user who cares about their data and drive health.


FAQs




Here are some frequently asked questions about DriveDx and drive health:


What is S.M.A.R.T. and why is it important?




S.M.A.R.T. stands for Self-Monitoring, Analysis, and Reporting Technology. It is a system that monitors various parameters of a drive's performance, reliability, and health, such as temperature, error rate, wear level, etc. It can also report any errors or failures that occur on the drive. S.M.A.R.T. is important because it can help you detect and prevent potential problems with your drive before they cause data loss or downtime.


How can I tell if my drive is failing or failed?




There are some signs that can indicate that your drive is failing or failed, such as:



  • Slow performance or frequent crashes



  • Strange noises or vibrations



  • Bad sectors or corrupted files



  • Missing or inaccessible data



  • SMART errors or failures



If you notice any of these signs, you should back up your data as soon as possible and check your drive health with a tool like DriveDx. DriveDx can alert you of any problems with your drive health and help you diagnose the cause and severity of the issue.


How often should I run drive self-tests?




Drive self-tests are diagnostic tests that check your drive for any problems or errors. They can help you identify any potential issues with your drive health and performance. You can run drive self-tests with a tool like DriveDx, which allows you to choose between short and full (extended) self-tests.


The frequency of running drive self-tests depends on how often you use your drive and how critical your data is. Generally, we recommend running a short self-test at least once a month and a full self-test at least once every six months. However, if you notice any signs of drive failure or degradation, you should run a self-test as soon as possible.


What are the limitations of DriveDx?




DriveDx is a powerful and comprehensive tool for monitoring and diagnosing your drive health on Mac, but it has some limitations that you should be aware of, such as:



  • It only supports Mac OS X 10.6.8 or later and 64-bit processors.



  • It only supports internal and external SSDs and HDDs, not flash drives, memory cards, optical drives, etc.



  • It may not support some rare or exotic drives or models that have non-standard SMART implementations.



  • It may not be able to detect some types of drive failures that are not related to SMART, such as mechanical or electrical failures.



  • It may not be able to prevent data loss or downtime in case of sudden or catastrophic drive failures.



Therefore, you should always keep a backup of your data and use DriveDx as a complementary tool to monitor and diagnose your drive health.


How can I contact DriveDx support?




If you have any questions, feedback, or issues with DriveDx, you can contact the DriveDx support team by using one of the following methods:



  • Email: support@binaryfruit.com



  • Contact form: https://binaryfruit.com/contact



  • Troubleshooting guide: https://binaryfruit.com/drivedx/troubleshooting-guide



  • User manual: https://binaryfruit.com/drivedx/user-manual



The DriveDx support team is friendly and responsive and will try to help you as soon as possible.


À propos

Bienvenue sur le groupe ! Vous pouvez entrer en contact avec...
Page de groupe: Groups_SingleGroup
bottom of page